778-885-0391Free estimate

Project notes · Metro Vancouver

Mechanical-room concrete preparation and epoxy flooring.

Original site photos showing preparation, detailed masking around fixed pipes and thresholds, perimeter application, and the freshly applied epoxy floor.

Fresh grey epoxy flooring in a compact mechanical room with masked edges and fixed service pipes.
Mechanical room · Fresh epoxy after surface preparation and detailed edge work.

Preparation to epoxy

A small floor with demanding edges.

The floor was mechanically prepared and cleaned before the epoxy was applied. The room required careful masking around the fire-door threshold, stepped wall edges, fixed service pipes and equipment.

Detailed preparation

Existing residue and weak surface material were removed, repairs were addressed, and the concrete was cleaned before the epoxy components were mixed and applied.

Controlled application

The perimeter and tight areas were cut in first, followed by the open floor. These photographs show the epoxy while fresh; final cure and return-to-service timing depend on the epoxy system and site conditions.

Text Matthew your project photos

Project progress

Preparation, edge work and fresh epoxy.

The full photo sequence shows the condition before epoxy and the application stages around the room.

Prepared concrete floor after grinding and cleaning, with the perimeter masked before epoxy application.
Prepared concrete floor after grinding and cleaning, with the perimeter masked before epoxy application.
Prepared floor at the fire-door threshold, with edges and the door sweep protected.
Prepared floor at the fire-door threshold, with edges and the door sweep protected.
Surface preparation around fixed service piping and the stepped wall perimeter.
Surface preparation around fixed service piping and the stepped wall perimeter.
A closer preparation view showing the cleaned concrete and detailed masking.
A closer preparation view showing the cleaned concrete and detailed masking.
Grey epoxy applied first around the perimeter and fixed penetrations before rolling the field.
Grey epoxy applied first around the perimeter and fixed penetrations before rolling the field.
Fresh epoxy across the service-pipe side of the mechanical room.
Fresh epoxy across the service-pipe side of the mechanical room.
Freshly coated floor viewed toward the fire door and wall-mounted alarm.
Freshly coated floor viewed toward the fire door and wall-mounted alarm.
Fresh grey epoxy flooring viewed from the room entrance.
Fresh grey epoxy flooring viewed from the room entrance.

Free written estimate

Tell us what you are planning.

Share your city, the work you have in mind, and your preferred timing. We will follow up to discuss your space and a no-obligation walk-through.

歡迎以廣東話或普通話聯絡,我們可協助您了解工程範圍及書面報價。

Call
778-885-0391
Have photos?
Text Matthew your project photos
Email
info@pacificanchorcontracting.ca
Service area
Richmond & Metro Vancouver

What happens next

  1. Matthew calls or texts you to discuss the project.
  2. We arrange a walk-through of your space.
  3. You receive an itemised written estimate to review.

No obligation. Your information is used to respond to your enquiry. Privacy notice.